A person that has been authorised to accept goods in transit without submitting the transit declaration to the customs office at the destination.
A person that has been authorised to carry out transit operations without presenting the goods and the transit declaration at the office of departure.
Anti-dumping duty is an import duty charged in addition to normal customs duty and applies across the UK and the whole EU. It allows the UK and EU to take action against goods sold at less than their normal value, defined as the price for 'like goods' sold in the exporter's home market.
An AEO is a party involved in the international movement of goods in whatever function that has been approved by, or on behalf of, a national customs administration, as complying with WCO or equivalent supply chain security standards. AEOs may include manufacturers, importers, exporters, brokers, carriers, consolidators, intermediaries, ports, airports, terminal operators, integrated operators, warehouses, distributors and freight forwarders.
The APHA issues CITES documentation. It is the UK CITES management authority.
Goods imported via the major ports and airports in the UK, or cleared into inland UK customs clearance sites, are managed by port community systems. For these you will need a port community system identity, otherwise called a 'Badge', 'Port Badge' or 'Credentials.' Separate badges are required for each inventory linked port, or a single badge can be used at multiple non-inventory locations.
The bulk import reduced data set can be used to declare one or more low value parcels in a single import declaration when importing goods to Great Britain. You have to apply to HMRC to use this service.
In the context of US export controls, BIS is the abbreviation for the US government body Bureau of Industry and Security. The BIS is part of the US Department of Commerce. The Bureau of Industry and Security administers the Export Administration Regulations (EAR) – the US export control law for the export, reexport, and transit (in country) of US products (commodities, software, and technologies) that are subject to the jurisdiction of the US EAR.
It is the BIS’ mission to ensure an effective export control and treaty compliance system and promote continued US strategic technology leadership. In addition, the Bureau of Industry and Security is also tasked with enforcing anti-boycott laws and coordinating with US agencies and other countries on matters around export controls, non-proliferation of weapons of mass destruction, and strategic trade.
Outside of the Bureau of Industry and Security, other US government agencies regulate more specialized exports such as defense articles and services, which are subject to the authority of the US Department of State’s Directorate of Defense Trade Controls. You can find a list of other agencies involved in US export controls on the BIS website or in Supplement No. 3 to Part 730 of the EAR.
EAR99, CCL, CCC, ECCN: Expert tips and checklists for export controls under US EAR
Covering all jurisdictions efficiently with Export Controls software from AEB
A bonded warehouse is a facility where imported goods can be stored without paying customs duties until they are cleared for release.
A Border Control Post (BCP) is a place where animals, plants, and their products coming into the UK from the EU and other third countries via seaports or airports are checked. These inspections are carried out to ensure that regulations are complied with and animal, plant, and public health are protected. It is the importer’s/exporter’s responsibility to make sure that their goods come into the country via the appropriate BCP as they are equipped and approved to process different commodities. Typically, the relevant BCP must be notified of the goods’ arrival by the importer. Until the end of June 2021, physical checks on all high-risk live animals and plants will be done at the point of destination or other approved premises. As from July 2021, checks will take place at UK BCPs. To find the BCP relevant for your commodities, refer here.
The company or person actually transporting the goods or in charge of, or responsible for, the operation of the means of transport.
In the context of US export controls, the abbreviation CCC stands for Commerce Country Chart. The CCC is maintained by the US Department of Commerce’s Bureau of Industry and Security (BIS). The Commerce Country Chart is contained in Supplement No. 1 to Part 738 of the US Export Administration Regulations (EAR). Please review Part 732 of the EAR for additional information on how to use the EAR, including the Commerce Country Chart.
In combination with a specific ECCN from the Commerce Control List, which contains corresponding information in the "Reasons for Control" section, the Commerce Country Chart helps to decide whether a license is required for shipping an item with that ECCN to a specific destination country.
EAR99, CCL, CCC, ECCN: Expert tips and checklists for export controls under US EAR
Covering all jurisdictions and embargoes efficiently with Export Controls software from AEB
In the context of US export controls, CCL is the abbreviation for the Commerce Control List. The CCL is maintained by the US Department of Commerce’s Bureau of Industry and Security (BIS). The Commerce Control List is contained in Supplement No. 1 to Part 774 of the US Export Administration Regulations (EAR).
The Commerce Control List includes items (commodities, software, and technologies) that are subject to the EAR.
Items that are listed on the CCL are organized according to alpha-numeric designations called Export Control Classification Numbers (ECCNs). Items subject to the EAR that are not listed on the CCL are designated as EAR99.
“Subject to the EAR” is a technical term that is defined in §734.2 of the EAR. It describes those items and activities over which BIS exercises regulatory jurisdiction under the EAR.
EAR99, CCL, CCC, ECCN: Expert tips and checklists for export controls under US EAR
Shipping controlled items efficiently with the Export Controls software from AEB
CCS-UK is the computerized cargo processing system operating in the UK major airports.
Customs Declaration Service (CDS) is the UK government’s new electronic system for handling customs declaration processes. CDS is replacing the Customs Handling of Import and Export Freight (CHIEF) system, which is closing down on March 31, 2023.
HMRC is implementing the system transition from CHIEF to CDS in several stages – with final deadlines for import declarations in September 2022 and for export declarations in March 2023.
You can learn more about it in this article or on the UK government website.
A specific document identifying the origin of the goods, on which the authority or body empowered to issue said certificate states that the goods originate in a specific country.
The Incoterm CFR stands for ‘Cost and Freight’ – meaning ‘costs and freight to the port of destination’. CFR is a shipping clause that can only be used in sea or inland waterway transport. This Incoterm is one of the dispatch clauses whereby the seller bears the costs of the main transport.
With CFR, in addition to delivery at the port of shipment, the seller must also conclude the sea freight contract and bear the freight costs to the port of destination. The sea freight carrier is therefore the seller's freight contract partner.
Customs Freight Simplified Procedures (CFSP) is an electronic declaration method that can be used when importing goods from third countries (including EU member states as from January 1, 2021) to the UK.
There are two CFSP procedures, Simplified Declaration Procedure (SDP) and Entry in the Declarant’s records, which can be combined.
Submitting import declarations with either procedure consists of two stages starting with a message to customs which provides a minimum amount of data to release the goods. After this simplified declaration, the full fiscal and statistical data must be submitted in a supplementary declaration by a specified deadline.
The EU or UK document which when completed by the import authorities demonstrates that a consignment has cleared SPS checks.
Customs Handling of Import and Export Freight (CHIEF) is the UK government’s old electronic system to handle customs declaration processes. It has already been replaced by CDS for import declarations and the transition for export declarations is underway. CHIEF supports the National Export System (NES) by providing an electronic gateway for making customs declarations. Companies that wish to import or export to/from the UK should now register for CDS and contact HMRC accordingly.
The Incoterm CIF stands for ‘Carriage and Insurance Paid to’. CIF is a shipping clause that can only be used in maritime or inland waterway transport. This Incoterm is one of the dispatch clauses whereby the seller bears the costs of sea transport and sea freight insurance.
Under the CIF trade clause, in addition to delivery at the port of dispatch, the seller must conclude the sea freight contract and bear the regular freight costs to the port of destination. The sea carrier is therefore the seller's agent.
The Incoterm CIP stands for ‘Carriage and Insurance Paid to’. This incoterm is applicable to all modes of transport and is one of the dispatch clauses where the seller bears the costs of the entire transport to the destination and provides transport insurance.
Here, the seller delivers the goods to the first carrier and organises, at their own expense but at the buyer's risk, the transport of the goods to the agreed destination (e.g. port, airport, railway station, customer's premises). In addition, the seller must take out ‘all-risk transport insurance’ (Institute Cargo Clauses – Covering A) covering 110% of the value of the goods in favour of the buyer.
This clause is preferable to the CIF clause when transporting general cargo or containerised goods.
The seller hands over the goods to the carrier at an agreed location. The seller is responsible for freight costs and insurance up to this location. Furthermore, the seller must take out transport insurance (with minimum cover) at their own expense. The CIP clause also obliges the seller to package and clear the goods for export.
CITES is an international agreement between governments to protect endangered plants and animals. Its aim is to ensure that international trade in specimens of wild animals and plants does not threaten the survival of the species.
Commodity codes classify goods for import and export. Knowing the correct commodity code for goods is required for filling in declarations and other paperwork. Commodity codes also define the duty and VAT rates you’ll be charged for your goods. Beside that they tell you if you can apply for preferential duty rating, or if your products are subject to any restrictions. The Trade Tariff Tool can be used to find commodity codes. As from January 1, 2021, the UK Global Tariff will apply to imports to the UK.
Community System Providers (CSP’s) operate inventory management systems which are directly connected with hundreds of carriers, transit sheds, and freight forwarders. They record and track the movement of goods within ports and airports. To submit customs declarations in the UK, companies need a badge of the relevant CSP. The data they specify in their declarations is verified with the help of the relevant CSP system and then forwarded to HMRC's electronic customs system. AEB works with the CSP badges from Pentant and MCP. The badge required will depend upon the ports where your goods will be imported. AEB will be happy to coordinate the setup of your Pentant badge. For MCP, you will need to provide your own badge details.
In the context of EU export controls, CFSP stands for the EU’s Common Foreign and Security Policy. In line with the CFSP, the EU applies restrictive measures (sanctions) to implement UN Security Council Resolutions or sanction decision of the EU, or to further the objectives of the CFSP. These objectives include promoting international peace and security, preventing conflicts, defending the principles of international law, and supporting democracy, the rule of law, and human rights.
The term “CFSP list” is commonly used to refer to the EU’s Consolidated Financial Sanctions Party List. It is the consolidated list of persons, groups, and entities subject to EU financial sanctions. The CFSP list is managed by the EU’s Directorate-General for Financial Stability, Financial Services and Capital Markets Union (DG FISMA) and regularly updated. This consolidated list of persons, groups, and entities subject to EU financial sanctions (CFSP list) reflects the officially adopted texts of financial sanctions published in the Official Journal of the EU.
CFSP list and more: Secure sanctions list screening with the AEB software Compliance Screening
Which sanctions lists are available in the AEB software Compliance Screening?
There are certain goods whose export is subject to a system of export licensing requirements. They are called controlled goods and they include:
There is a limited range of goods that require import licences as their import is controlled. Import licensing requirements can be in place against imports from specific countries or from any country. The full list of goods classified as controlled by the UK Government can be found in the ANNEX C of this document.
The Incoterm CPT stands for "Carriage Paid To" – "Freight paid to destination". This Incoterm is applicable to all modes of transport and is one of the dispatch clauses where the seller assumes the costs of the main transport.
In the case of ‘CPT, destination’, the seller delivers the goods to the first carrier and organises, at their own expense but at the buyer's risk, the transport of the goods to the agreed and specified destination (e.g. port, airport, railway station, customer's premises or construction site). This clause is preferable to the CFR clause for the transport of general cargo or containerised goods.
Previously referred to as a Badge, or Port Badge.
Goods imported via the major ports and airports in the UK, or cleared into inland UK customs clearance sites, are managed by port community systems. For these you will need a port community system identity, otherwise known as 'Credentials.' Separate credentials are required for each inventory linked port, or single credentials can be used at multiple non-inventory locations.
CSPs are independent trade systems that directly serve carriers, transit sheds and freight forwarders. CSPs record and track the movement of goods within ports and airports, enabling them to operate more efficiently.
The common transit convention is used to ease the movement of goods between or through any common transit countries. The UK is a member of the common transit convention.
Customs brokers (or customs agents) are specialised in submitting export and import declarations and clearing goods through customs. They offer their services in dealing with customs to companies that do not want or cannot do this themselves. They can either act in the company’s name (direct representative) or for companies’ in their own name (indirect representative).
Customs clearance is the formal procedure conducted by customs authorities to validate and approve the import or export of goods across international borders.
This process involves submitting the necessary paperwork, such as invoices and permits, providing accurate information about the goods being shipped, paying any applicable taxes or duties, and adhering to specific regulatory requirements set by the importing or exporting country. Customs clearance ensures compliance with trade laws and regulations, facilitates the smooth movement of goods, and helps prevent delays or complications in the import / export process.
A customs declaration is an official document in which you specify details about the goods you export from the UK or import into the UK. As from January 1, 2021, you will also need to submit customs declarations for goods you export to (export declaration) or import from (import declaration) EU countries.
When importing goods into the UK after January 1, 2021, the importer will have to pay customs duties as laid out in the new UK Global Tariff. To find out the amount payable, the imported goods need to be classified correctly, their origin must be stated, and the customs value of the goods must be determined. If you are eligible and want to defer the payment of duties, you will need a duty deferment account.
Customs Freight Simplified Procedures (CFSP) is an electronic declaration method that can be used when importing goods from third countries (including EU member states as from January 1, 2021) to the UK. There are two CFSP procedures, Simplified Declaration Procedure (SDP) and Entry in the Declarant’s records, which can be combined. Submitting import declarations with either CFSP procedure consists of two stages starting with a message to customs which provides a minimum amount of data to release the goods. After this simplified declaration, the full fiscal and statistical data must be submitted in a supplementary declaration by a specified deadline. Find out more about CFSP and apply here.
A customs guarantee is an agreement to pay for customs debt that has already occurred, referred to as actual debt, or that will occur as a result of certain customs special processes, referred to as potential debt.
When duty is not paid at the time of import or export, a customs guarantee is often required. Additionally, a guarantee may be required when the value of import tariffs is uncertain or contested. If you do not make timely payments of duties or charges, your guarantor becomes accountable for them.
When businesses declare goods for import, they must state the customs value of the goods in the customs declaration. The customs value is also needed to calculate customs duties. Determining the customs value can be challenging. For this reason, the WTO’s agreement on customs valuation, which is applicable to all WTO member states, defines rules for a fair, uniform, and neutral valuation of imported goods. For example, it sets out that the primary basis to determining the customs value is to be “the transaction value, that is the price actually paid or payable for the goods when sold for export to the country of importation“ (Article 1). Further criteria must be taken into account. This agreement will continue to apply to goods imported into the UK after January 1, 2021.
This is the account number for your duty deferment account.
The Incoterm DAP stands for ‘Delivered At Place’. It applies to all modes of transport and is one of the so-called arrival clauses.
Here, the seller bears all costs and risks up to the agreed destination. The seller only fulfils their delivery obligation when they make the goods available for unloading on the arriving means of transport. The seller must clear the goods for export, however, they are not obliged to clear the goods for import. The actual unloading costs and the risk of unloading are borne by the buyer.
In supply contracts where the transfer of risk is only to take place after unloading (e.g. in the case of air freight), DPU should be agreed upon.
A duty deferment account lets an importer (or someone who represents them) make one duty payment a month through direct debit, instead of paying for individual consignments.
If you import goods regularly, you can apply for a duty deferment account to delay paying most customs or tax charges when you import goods into Great Britain, or release goods from an excise warehouse.
Details on how to apply for a duty deferment account can be found here.
The Incoterm DDP stands for ‘Delivered Duty Paid’. It applies to all types of transport and is one of the so-called arrival clauses.
Here, the seller bears all costs and risks up to the agreed destination. The seller only fulfils their delivery obligation when they make the goods available for unloading on the arriving means of transport. The seller must clear the goods for export. They are also obligated to clear the goods for import, obtain all necessary permits and pay all customs duties, taxes and other import charges.
The unloading costs and the risk of unloading are usually borne by the buyer. In supply contracts where the transfer of risk is only to take place after unloading (e.g. in the case of air freight), this should be expressly agreed upon.
This clause should therefore only be used in justified exceptional cases.
The person making a customs declaration in their own name or the person in whose name a customs declaration has been made.
DEFRA is the UK government department responsible for the import and export regimes that protect human and plant health.
An amount that is insignificant is known as de minimis.
With regard to Imports, many countries currently have a value of goods below which the goods can be imported without the importer having to pay duty (e.g. EU EUR150, UK GBP135, US USD800). This is referred to as de minimis.
These duty exemptions are currently being reviewed in many countries (EU, UK, USA) with a view to them being removed.
The Incoterm DPU stands for ‘Delivered At Place Unloaded’. It applies to all modes of transport and belongs to the so-called arrival clauses (Group D).
Under this Incoterm, the seller is responsible for unloading the goods from the arriving means of transport and making them available to the buyer at the named destination (which may also be the port). The seller bears all costs and risks of transport to the destination, including unloading. The seller must clear the goods for export, however, they are not obliged to clear the goods for import.
Dual-use items are goods, software and technology that can be used for both civilian and military applications. The term “dual-use goods” is often incorrectly used in the common use of everyday language when actually “dual-use items” are meant. While the term “goods” typically refers to commodities in this context, the term “item” encompasses goods as well as software and technology.
Different export control regimes across the globe control the export, transit, brokering, and technical assistance of dual-use items as part of their mission to contribute to international peace and security and prevent the proliferation of Weapons of Mass Destruction (WMD).
For this purpose, national and international lists of dual-use goods, software, and technology are issued by governing export control bodies, and companies are required to check such lists carefully in order to comply with any related trade prohibitions and restrictions as well as licensing requirements.
Non-listed goods, software, and technology may also be subject to controls, prohibitions, and licensing requirements due to possible impact on public security or human rights considerations. In this context, the end-use of such items at the end-user as well as involved countries in the associated trade transaction play a vital role.
Learn more about legal certainty for shipping dual-use items
Learn more about observing all embargoes with automated embargo checks
Learn more about securely checking critical end-use of your goods
A DUCR is assigned by the declarant to uniquely identify a single consignment of goods which is the subject of one or more customs declarations.
Traders importing goods into the UK must normally pay their full customs duties and import VAT for each consignment at the time of import. In particular for traders importing goods on a regular basis, applying for a duty determent account (DDA) instead may be beneficial. This will allow them to defer paying their charges to the 15th of the next month, which they can then do using a Direct Debit system. Find details about how to apply for a duty deferment account here.
As part of the transition from NCTS Phase 4 to NCTS Phase 5, the DVA replaced the New Computerized Transport System (NCTS) in NL.
In the context of US export controls, ECCN is the abbreviation for Export Control Classification Number. The ECCN is an alphanumeric designation used in the US list of dual-use items (Commerce Control List or CCL) to classify dual-use items.
An ECCN categorizes items based on their nature and technical parameters. The US Export Control Classification Number serves as important criteria in US export controls to check license requirements for exports and reexports.
The contents listed in the ECCNs are mostly identical to descriptions of items in Annex I of the EU Dual-Use Regulation. The dual-use item control list both in the EU and the US are based on decisions taken by international export control regimes (e.g. Wassenaar Arrangement, etc.).
EAR99, CCL, CCC, ECCN: Expert tips and checklists for export controls under US EAR
Help for compliantly shipping items with ECCN numbers: AEB’s software Export Controls
EIDR allows economic operators to release goods to a customs procedure without the need to provide a full customs declaration at the point of release, instead using a simplified data set via an entry in their own electronic commercial records. A supplementary declaration may be required at a later date providing the full fiscal and statistical information.
When you declare your goods to a customs procedure by EIDR, you may need to notify customs that this has taken place.
EMCS is a computerized system for recording and monitoring the movement of excise goods (alcohol, tobacco and energy products) in the territory of the EU and UK.
If you are moving goods into Great Britain, into Northern Ireland from Great Britain, or into Northern Ireland from outside the EU, you'll need to make an entry summary declaration.
The entry summary declaration will have safety and security information about your goods.
If you are moving goods into or out of the UK and make a customs declaration, you need an EORI number (Economic Operators Registration and Identification number). From January 1, 2021, only EORI numbers starting with GB will be accepted when trading goods between the UK and non-EU as well as EU countries. A GB EORI number looks like this, for example: GB123456789000. You can validate your existing EORI number here. If you do not have an EORI number or your number isn't a GB EORI, find more information and apply for it here.
An External Temporary Storage Facility (ETSF) is a secure, HMRC-approved location, situated outside of the appointed area of an approved port/airport where chargeable goods may be held before customs clearance is completed.
With the regulation on deforestation-free products (EUDR) the EU aims to counteract the global loss of forest areas. The EU has compiled all the relevant information on the following website: Implementation of the EU Deforestation Regulation.
From the end of December 2026, relevant raw materials, finished and semi-finished products may only be placed on the EU market, made available on the EU market, or exported from the EU if:
The Export Accompanying Document (EAD) is a document based on the data specified in the export declaration. It is required for third-country exports and accompanies the goods to the office of exit where information is received that the goods have left the UK. From the EAD, the Movement Reference Number (MRN) is generated.
An export declaration is an official document in which you specify details about the goods you export. If you are a company based in the UK and export goods on a permanent basis to customers outside the UK, you must complete and submit an electronic export declaration via the National Export System (NES). As from January 1, 2021, this will also apply to goods exported to EU countries.
An export licence is a document issued by the UK government which allows businesses to export certain goods to certain destinations. Businesses need to have a licence or certificate if they want to export the following types of goods from the UK:
If you're moving goods outside the UK, you'll need to make an exit summary declaration if you've not fulfilled safety and security requirements with a full customs export declaration.
Safety and security information must be provided for all export movements out of Great Britain (England, Scotland and Wales), unless they are going to Northern Ireland or are otherwise exempt.
There is a requirement to submit export information for some movements out of Northern Ireland, unless they are going to the EU.
“Ex Works” means that the seller delivers when it places the goods at the disposal of the buyer at the seller’s premises or at another named place (i.e., works, factory, warehouse, etc.). The seller does not need to load the goods on any collecting vehicle, nor does it need to clear the goods for export, where such clearance is applicable.
Tip: EXW is rather suitable for domestic trades where there is no intention to export. It imposes the least set of obligations to the seller. The buyer should use it with care.
The Incoterm FAS stands for ‘Free Alongside Ship’. It applies exclusively to transport by sea and/or inland waterways. It belongs to the so-called dispatch clauses where the seller does not assume the costs of the main transport (Group F).
The seller delivers the goods at his own expense to the agreed port of shipment, alongside the vessel provided by the buyer. The seller is responsible for clearing the goods for export.
The Incoterm FCA stands for ‘Free Carrier’. It applies to all types of transport and is one of the so-called dispatch clauses where the seller does not assume the costs of the main transport (Group F).
Here, the seller bears all the costs and risks until the goods are handed over to the carrier. This means that the seller is responsible for packaging, inspection, and clearing the goods for export at their own expense. After that, the buyer bears the costs and risks associated with the delivery of the goods. They are therefore responsible for the main transport, transit and import.
The designated place of delivery is either a location belonging to the seller (loaded onto the carrier's vehicle) or the unloading point at a shipping terminal (e.g. airport, port or freight station).
BAFA is the abbreviation for the Federal Office for Economic Affairs and Export Control in the Federal Republic of Germany. BAFA is a superior federal authority subordinated to the Federal Ministry for Economic Affairs and Energy. The Federal Office of Economics and Export Control also performs tasks for other federal ministries and is based in Eschborn near Frankfurt am Main, Germany.
The broad range of tasks of the BAFA span across the sectors foreign trade, promotion of economic development and of SMEs, energy, and auditor’s oversight. In the relevant context here, BAFA performs important foreign trade tasks in the area of export controls. One of the focal points is checking whether the exports of goods are subject to license requirements and deciding on licensing applications.
The Federal Office of Economics and Export Control also monitors and implements embargoes and coordinates supra-regional export control bodies, such as, for example, the Chemical Weapons Convention or the Nuclear Suppliers Group. On behalf of the EU, the BAFA is also helping third countries to develop their own export control systems.
You can find more information and tasks of the BAFA across all areas directly on the website of the Federal Office for Economic Affairs and Export Control.
The Incoterm FOB stands for ‘Free On Board’. It applies exclusively to sea transport and/or inland waterway transport. It belongs to the so-called dispatch clauses where the seller does not assume the costs of the main transport (group F).
Free on Board means that the seller fulfils their delivery obligation when they place the goods on board the ship at the named port of shipment. They pack the goods at their own expense and clear them for export.
Foreign trade law comprises all legal provisions of a country that affect foreign trade. This relates both to the movement of goods and to the movement of services, capital, and payments. Foreign trade laws in the various jurisdictions across the globe typically consider their own security, foreign, economic and trade policy concerns on a national level.
The area of foreign trade is generally highly dynamic. As a result, constant changes in the global political landscape are leading to adjustments in foreign trade policy and in return also to frequent changes in the foreign trade law of a respective state. Restrictions governed by foreign trade laws are usually reflected in prohibitions and license requirements.
In the member states of the European Union (EU), foreign trade restrictions are based on both national and EU law. Export control laws restrict the fundamental freedom of foreign trade that applies in the EU with the aim of preventing the proliferation and development of conventional arms and weapons of mass destruction and to protect human rights.
The EU Dual-Use Regulation, which applies in all member states of the EU, provides the legal framework for dealing with civilian goods, so-called dual-use items. Trading military equipment is regulated at national level of the EU member states.
A free trade agreement (FTA) is an international treaty between two or more countries to reduce or eliminate trade barriers, facilitating easier exchange of goods and services. The primary goal is to reduce or eliminate tariffs, quotas, and other trade barriers, thereby encouraging international trade and economic cooperation. FTAs can be bilateral (between two countries) or multilateral (involving three or more countries).
HMRC are the UK’s tax, payments, and customs authority, see About us page.
HMRC is the UK’s tax, payments, and customs authority. Among other responsibilities, HMRC facilitates legitimate international trade, protects the UK’s fiscal, economic, social, and physical security before and at the border, and collects UK trade statistics. CDS is the computer system used by HMRC to manage customs and related processes.
Some foods or feed of non-animal origin are considered high risk because they pose health risks associated with the country of origin. For example, products may be considered high risk if they contain contaminants such as pesticides or salmonella.
The Import Control System 2 (ICS2) is a pre-arrival safety and security programme that is being implemented by the EU, Switzerland, Norway and Northern Ireland as a replacement for the original Import Control System (ICS).
It is designed to support effective risk-based customs controls whilst facilitating the free flow of legitimate trade across the EU external borders.
ICS2 will collect data about all goods entering the EU prior to their arrival. Economic Operators (EOs) will have to declare safety and security data to ICS2 through an Entry Summary Declaration (ENS). This is a separate and different declaration to a customs declaration.
Further information can be found at this EU website.
ICS2 is being released in 3 phases, some of which are already in force, with each release impacting upon different Economic Operators:
A simplified data set of ordinary commercial information submitted to TSS.
(See also SPIMM)
An import declaration is an official document in which you specify details about the goods you import. If you are a company based in the UK and want to bring goods into the UK, you must complete and submit an electronic import declaration. This needs to be done via HMRC's Customs Declaration Service (CDS).
Import duty, also known as customs duty or tariff, is a tax imposed by a government on goods imported into a country from abroad. Import duties are typically levied as a percentage of the value of the imported goods, or based on specific quantities or units, depending on the classification of the goods and the tariff schedule of the importing country.
A legal document issued by the importing country's government that grants permission to import certain goods.
The quantity of goods that may be imported into a country without restriction or imposition of additional duties, relating to specific goods.
Since 1919, when the International Chamber of Commerce (ICC) was founded in Paris, they have strived to provide merchants around the world with standardized delivery and trading terms. Initially, comparative studies were conducted (in 1923 and 1928). However, since 1936, the ICC has moved on to developing its own rules based on these studies – the Incoterms.
Since 1936, the rules have been revised repeatedly, namely in 1953, 1967, 1974, 1980 and every ten years since then. These revisions have taken into account technical advances such as the expansion of rail transport, the increase in air freight, and container deliveries.
Incoterms do not lose their validity – even today, transactions could be conducted using Incoterms® 1990 (e.g. due to old framework agreements that are still valid) if the parties involved (seller, buyer and, where applicable, carrier) agree to this. However, this must be specified in the contract.
The Incoterms specification should be structured as follows:
Term, location, version; e.g.:
FCA, Sigmaringer Straße 109, 70567 Stuttgart, Incoterms 2020
The location should be specified as precisely as possible (as precisely as is economically reasonable).
The current Incoterms came into force on 1 January 2020. There are now (still) eleven Incoterms – seven apply to all modes of transport and four to sea and inland waterway transport. Further details can be found in the following glossary articles:
IOSS is an electronic one-stop shop portal in the European Union (EU) which serves as a point of contact for the import of goods from third countries into the EU.
The scheme aims to simplify the declaration and payment of value-added tax when importing goods into the EU.
A procedure allowing the import of goods for the purposes of processing and re-exporting them. The import duties are either suspended, together with commercial policy measures (suspension system) or initially paid and refunded at re-export (drawback system).
An ITSF is an approved place situated within the appointed area of an approved port/airport where chargeable goods are held in temporary storage before customs clearance is completed. Internal temporary storage facilities may also be used for the storage of goods subject to export control.
Low-risk goods are all types of goods that are not dangerous, hazardous, prohibited, or require export licences of any kind. More specifically, goods that are not included in the following list can be seen as “low-risk goods”: List of goods imported into Great Britain from the EU that are controlled from January 2021
The LRN is defined by the declarant, and used as a reference for communication with customs.
MCP is a community system provider (CSP).
MoU stands for Memorandum of Understanding. This is an agreement between parcel carriers (such as DPD) and HMRC, where it is agreed that parcel carriers can be responsible for their own customs checks for certain consignments. An MoU is essentially a bundle of smaller consignments, to allow for quicker processing for parcel carriers.
In order to be included in a MoU, the consignments must meet the following requirements:
If the consignment meets all these criteria, this can be flagged as MoU, and bundled together into a consignment manifest. This will create one declaration for potentially hundreds of smaller consignments, allowing for quicker customs processing for parcel carriers.
The singular declaration will not show the full details of everything included within, however it will show 1 line item, saying BULK.
The MRN is a customs identification number that is created each time a declaration is submitted for importing or exporting goods. The number generated is bespoke, allowing your goods to be uniquely linked to you.
MUCRs are used to group or link several other UCRs under a master UCR (MUCR).
The National Clearance Hub handles the movement and processing of goods moving into, out of, or through the UK. The National Clearance Hub is also responsible for the control and amendment of declarations after clearance.
The New Computerised Transit System (NCTS) is a system of electronic declaration and processing that traders must use to submit Union Transit (UT) and Transports Internationaux Routiers (TIR) declarations electronically. Paper declarations are only allowed when transit declarations cannot be made on the NCTS system or for travellers with goods in excess of their duty-free allowance.
The NCTS will process the declaration and control the transit movement. It’s used by the UK, all member states of the EU and the signatories of the Common Transit Convention.
The Common Transit procedure can be used for movements between the UK, the EU and the Common Transit countries. These are the European Free Trade Association (EFTA) countries (Switzerland, Liechtenstein, Norway and Iceland) and Turkey, North Macedonia and Serbia.
The TIR procedure is used for transit operations that begin, end or transit a third (non-EU) country. You’ll also have to declare such goods to NCTS for any part of the journey taking place within the UK and the EU.
The National Export System (NES) is a computer-based system which enables export declarations to be submitted electronically. The use of the National Export System (NES) is mandatory for businesses. NES operates within CHIEF.
To get access to NES, businesses need to have:
Transit procedures are used when goods are transported within the same
customs territory (EU) or between the customs territories of different
contracting parties (Common Transit). Using the Common Transit procedure
means that customs clearance formalities that are applicable at import
are temporarily suspended at the point of entry into the customs
territory. Duties, taxes, and commercial policy measures are only
applied when the goods reach their destination.
The New
Computerised Transit System (NCTS) has replaced the paper-based
procedure with an exchange of electronic messages. Within the context of
NCTS, the external Union transit procedure (T1) is particularly
relevant for UK traders as it applies mainly to the movement of
non-Union goods. Since the UK is no longer part of the European Union
and Customs Union, goods traded from the UK are now most likely to fall
under this category.
Learn more about how to use the NCTS (UK.gov).
NCTS
is available from the AEB “Basic” price plan. Additional setup costs
apply. NCTS is not available with the Easy Mode in the “Starter” price
plan.
Ozone Depleting Substances (ODSs) are those substances which deplete the ozone layer and may contribute to global warming. They were widely used in refrigerators, air-conditioners, fire extinguishers, in dry cleaning, as solvents for cleaning, electronic equipment and as agricultural fumigants.
In the context of US export controls, the abbreviation OFAC stands for US Office of Foreign Assets Control. The OFAC is a US government body that forms part of the US Department of the Treasury. The US Office of Foreign Assets Control administers and enforces economic and trade sanctions based on US foreign policy and national security goals. Restrictive measures issued by the OFAC target foreign countries and regimes, terrorists, international narcotics traffickers, those engaged in activities related to the proliferation of weapons of mass destruction, and any other threats to the national security, foreign policy, or economy of the US.
The Office of Foreign Assets Control administers different sanctions programs. OFAC sanctions can be either comprehensive or selective, using the blocking of assets, indirect or direct bans on provisions, as well as other trade restrictions to accomplish foreign policy and national security goals. It is to note that the OFAC does not maintain a specific list of countries that US persons cannot do business with because the different US sanctions programs vary in scope. Some are broad-based and oriented geographically and others are targeted (i.e. counter-terrorism, counter-narcotics) and focus on specific individuals and entities.
OFAC sanctions programs may encompass broad prohibitions at the country level as well as targeted financial sanctions against individuals. OFAC sanctions lists include the Specially Designated Nationals List and the Consolidated non-SDN Sanctions List.
OFAC sanctions lists and many more: All available lists in the AEB software Compliance Screening
A customs special procedure that allows the temporary export of free circulation goods for processing / repair and re-import with full or partial duty relief.
Pentant is a Community System Provider (CSP) in the UK.
PLACI is a security measure that assesses terrorism risk before loading cargo onto an aircraft.
The PLACI information is a specific 7+1 data set drawn from consignment data and provided to regulators. It is filed to the destination EU member via ICS2.
Goods imported via the major ports and airports in the UK, or cleared into inland UK customs clearance sites, are managed by port community systems. For these you will need a port community system identity, otherwise called a 'Badge', 'Port Badge', or 'credentials.' Separate port badges are required for each inventory linked port, or a single badge can be used at multiple non-inventory locations.
The EU portal “Proof of Union Status” (PoUS) is an electronic system provided for in the UCC to verify the Union status of goods. Since 2024, it has replaced the T2L and T2LF shipping documents. In addition, cargo manifests serving as proof of status are also processed through the IT system. Simplifications are provided for companies with authorization as approved issuers.
To issue this electronic proof, your company must have access to the EU Trader Portal.
The system assigns a Master Reference Number (MRN) when proof is requested. This proof is stored in the PoUS database and remains valid for 90 days. When the goods are imported into the respective country, the MRN is presented to the customs authorities so that they can verify the certificate and decide whether or not to grant Union status.
The European Commission does not currently provide an application programming interface (API). Therefore, requests for a T2L/T2LF certificate can only be created manually via the EU Trader Portal’s user interface; alternatively, an upload using an XML or CSV file is possible.
Northern Ireland: Businesses in Northern Ireland are subject to both UK and EU customs regulations and must use the EU PoUS system for manual data entry.
See Section 2.6 of Version 7.2 of the “HMRC Transit Manual Supplement,” which provides additional guidance for the United Kingdom in addition to the EU Transit Manual.
Goods derived in some form from animals are referred to as products of animal origin (POAO). POAO include certain live animals for human consumption, foodstuffs such as meat, milk, and eggs, and further by-products. When importing POAO from third countries, which will include EU countries as from January 2021, you must generally notify the competent Border Control Post (BCP) at the port or airport ahead of the arrival of your goods. For imports from EU countries, the requirement for pre-notification and health documentation for POAO will apply as from April 2021.
PVA allows UK VAT registered persons to both declare and reclaim VAT on UK imported goods on their VAT returns, paying and recovering import VAT on the same VAT return.
The quantity of goods that may be imported into a country without restriction or imposition of additional duties, relating to specific goods.
ROW refers to UK transports to and from countries that are not EU member states. When exporting to and importing from EU member states, the RoRo transport type is used for most transports. RoRo transports are not possible for exporting to and importing from the rest of the world. Customs formalities for ROW are more complex.
Subject to specific conditions, Returned Goods Relief removes or reduces the repayment of import duties for goods that are re-imported into the same customs territory that they have already been exported from.
RoRo implies a specific type of transport. For the UK, RoRo relates to any kind of transport from the UK to the mainland EU (or the other way round), which is either done by ferry (east coast, Dover,…) or via the Euro Tunnel (by train). Furthermore, RoRo may relate to goods transported on trucks (with a driver) or unaccompanied trailers (without a driver). The customs clearance location is most likely to be located near a port. In the UK, not all customs clearance locations can be used for the RoRo use case; only the ones listed on the following page: Roll on Roll off location codes.
A safety and security declaration is used by border authorities to analyse the potential risk caused to their territory by goods crossing their border. There are two types of safety and security declaration - ENS (Entry Summary Declaration) and EXS (Exit Summary Declaration).
SIREN and SIRET numbers are unique identification codes assigned to businesses and their various establishments by the French National Institute of Statistics and Economic Studies (INSEE).
The SIREN (Système d'Identification du Répertoire des Entreprises) number is a nine-digit identification code assigned to every registered business entity in France. It functions as the main registration number of the business and remains unchanged throughout the lifetime of the business, even if the business moves or undergoes a significant restructuring. The SIREN number is a key element in business-to-government interactions, particularly in the areas of regulatory compliance, financial reporting, and statistical tracking.
A SIREN number comprises nine digits, and its format is entirely numeric. There are no other special characters or alphabetic components involved in the structure of a SIREN number. Its purpose is to serve as the primary identifier of the business, and it must appear on all official documents, such as invoices, contracts, and government filings.
SIRET and SIREN numbers are unique identification codes assigned to businesses and their various establishments by the French National Institute of Statistics and Economic Studies (INSEE).
While the SIREN number identifies a company as a whole, the SIRET (Système d'Identification du Répertoire des Etablissements) number specifically identifies individual establishments or branches of the business. Every business can have multiple establishments, and each one will receive its own SIRET number, which is essentially an extension of the SIREN number but with added specificity.
A SIRET number is composed of 14 digits in total. The first nine digits correspond to the company’s SIREN number, while the final five digits represent the NIC (Numéro Interne de Classement), which is a unique code that identifies the specific establishment or branch. This system ensures that each physical location or operational branch of a business is distinctly recognized within the administrative framework.
The SIRET number is necessary for any dealings that involve a specific branch or location of a business, and it also plays a role in making your business compliant with various French regulations regarding the display of business information. Just like the SIREN number, the SIRET number must be displayed on all formal business documents, including invoices, employment contracts, and tax filings.
Simplified custom movements available to traders under the Windsor Framework where goods are moving from GB-NI via direct movement and are "not at risk" of entering the EU.
Sanitary and Phytosanitary measures are the rules that govern trade in animals and plants and their products
The T2L and T2LF forms serve as proof of the status of goods as Union goods when they are transported between two locations within the customs territory of the Union. They are based on the Single Administrative Document and are sometimes referred to as a waybill. They are frequently used in maritime transport, but other forms of proof of status are also possible, in particular the endorsements “T2L” / “T2LF” on a commercial document or “C” / “F” on a manifest. If the shipment is processed via NCTS, these two forms are not applicable.
The Difference
The T2L/T2LF documents must be endorsed by customs. This requirement is waived if the exporter holds an Authorized Issuer designation.
Since 2024, proof of status has been provided via the electronic Proof of Union Status (PoUS) system.
Tariffs in international shipping refer to the fees or taxes imposed on goods when transported across international borders. They represent a tax or duty levied by governments and can vary based on factors such as the type of goods, their value, and the trade agreements in place between the countries involved. Each country typically sets its own tariffs, with can differ widely depending on trade policies, economic objectives, and international agreements.
The Trader Dress Rehearsal is a free service, provided by HMRC, which is designed to help customers prepare for using the live Customs Declaration Service (CDS).
The TDR is declarant focused and lets you submit different declaration scenarios in a simulated Customs Declaration Service.
The transition period (also called implementation period) started on February 1, 2020 and will end on December 31, 2020. During the transition period, the United Kingdom is not a Member State of the European Union anymore, however, it is still part of the EU customs union and single market. This means that many things will stay the same as before until the end of the transition period. During the transition period negotiations take place between the UK and the EU to determine their future relationship, for example regarding a free trade agreement.
The UCC defines the legal framework for customs rules and procedures in the EU.
The UCR is a reference number for customs use, and may be required to be reported to customs at any point during a customs procedure.
As from January 1, 2021, the UK Global Tariff will apply to all goods imported to the UK unless an exception applies. It will replace the EU’s Comment External Tariff which applies until December 31, 2020.
The UK Internal Market Scheme is an authorization that allows you to declare your goods 'not at risk' if they are brought into Northern Ireland for sale or final use by end consumers in Northern Ireland (and Great Britain in the case of movements from Great Britain) and meet all the other criteria to move under UKIMS.
To join the UK Internal Market Scheme, you will need to apply online for authorization.
This is used to uniquely identify locations that are used for trade and transportation, such as ports, rail and road terminals, airports, postal exchanges and border crossings. It consists of five characters, the leading two characters consisting of a country code, and the remaining three characters uniquely identifying a location within that country.
In the context of US export controls, the abbreviation US EAR refers to the US Export Administration Regulations. The US EAR are a set of regulations that can be found in the US Code of Federal Regulations (CFR) – namely within Title 15 CFR § 730-774. These Export Administration Regulations are administered by the US Commerce Department’s Bureau of Industry and Security (BIS).
The US EAR govern the export, reexport, and transfer (in-country) of dual-use items (commodities, software, and technology). §734.3(b) of the EAR defines which items or activities do not fall under the jurisdiction of the Export Administration Regulations.
US EAR-regulated items are either listed on the Commerce Control List and have an ECCN due to their technical characteristics or they can be classified as EAR99.
EAR99, CCL, CCC, ECCN: Expert tips and checklists for export controls under US EAR
Covering all jurisdictions efficiently with Export Controls software from AEB
In the context of US export controls, US ITAR stands for the US International Traffic in Arms Regulations. These International Traffic in Arms Regulations are primarily administered by the Department of State’s Directorate of Defense Trade Controls (DDTC). The ITAR are a set of US regulations on the export and import of defense-related articles and services. The International Traffic in Arms Regulations implement the US Arms Export Control Act (AECA) and can be found in the US Code of Federal Regulations (CFR) – in Title 22 CFR § 120-130.
Items subject to control under the International Traffic in Arms Regulations are listed on the US Munitions List (USML) and include articles, services, and related technical data. The ITAR also include a specific section for space-related products, services, and technologies.
All manufacturers, exporters, and distributors of defense articles, related technical data, and defense services as defined by the ITAR are required to register with the DDTC. Anyone intending to export or temporarily import a defense article must obtain prior approval of the DDTCC unless they qualify for an exemption in line with the US ITAR.
Shipping controlled items securely and compliantly with Export Controls software from AEB
In the context of US export controls, the abbreviation USML stands for United States Munitions List. The USML is found in the US Code of Federal Regulations (CFR) in Title 22 CFR § 121 and is administered by the Department of State’s Directorate of Defense Trade Controls (DDTC). Amendments of the United States Munitions List are published in the Federal Register.
The USML lists articles, services, and related technical data that are designated as defense articles or defense services in line with sections 38 and 47(7) of the Arms Export Control Act (AECA). Categories of the United States Munitions List are organized by alphanumerical paragraphs and subparagraphs that usually start by enumerating or otherwise describing end-items, followed by major systems and equipment; parts, components, accessories, and attachments; and technical data and defense services directly related to the defense articles of each USML category.
It is to note that if articles are not controlled on the USML, they may be subject to control by another US government regulatory agency – such as the US Commerce Department’s Bureau of Industry and Security (BIS), which administers the Export Administration Regulations (EAR).
Shipping controlled items securely and compliantly with Export Controls software from AEB
In the context of export controls, WA is the abbreviation for “Wassenaar Arrangement”. It is the short name for the Wassenaar Arrangement on Export Controls for Conventional Arms and Dual-Use Goods and Technologies and stands for the control of international trade in strategically important dual-use goods and weapons.
It is one of four multilateral export control regimes (MECR) and has 42 participating states around the world (status July 2020). The WA was established on July 12, 1996, in Wassenaar, the Netherlands.
The WA was established to contribute to regional and international security and stability. With this goal, the WA is by promoting transparency and greater responsibility in transfers of conventional arms and dual-use goods and technologies. Measures under the Wassenaar Arrangement aim to ensure that transfers of such items do not contribute to the development or enhancement of military capabilities (directly or indirectly).
The WCO is an intergovernmental organisation headquartered in Brussels, Belgium, with a mission to enhance the effectiveness and efficiency of customs administration worldwide. It is made up of representatives of the customs administrations of member countries.
The WTO focuses on the removal of barriers to international commerce through multi-lateral trade agreements. These agreements, negotiated among its membership, govern a wide range of trade matters that keep countries' trade policies within agreed limits. Its members, representing the leadership of each country, agree to abide by the negotiated rules and the WTO provides a dispute settlement process if they cannot agree.
Goods and services consumed in the UK are subject to VAT. When businesses export goods (including to EU countries after January 1, 2021) and therefore the goods are “consumed” outside the UK, the VAT can be zero-rated if certain conditions are fulfilled. These conditions are as follows: